• Instrumentation for Industry

Pulsite Link Programmable Pulse & Analog Converter

By /
Pulsite Link Programmable Pulse & Analog Converter

Pulsite Link Programmable Pulse & Analog Converter

Titan’s programmable Pulsite Link, now available with an LCD display option, allows the user to convert standard pulse output flow meters to give linearised analog and NPN/PNP outputs. The device will accept both pulse and reed switch devices and provides 5Vdc to the installed flow meter. The display model enables local indication of flow rate, total or both, from the installed pulse flowmeter. A local and remote reset for the totaliser is also featured with the display option. Titan’s Interface Software allows the user to configure and test the system via USB and a computer. There is easy access to the USB connection to allow adjustment of settings without the need to uninstall the unit. The USB connection via the base port offers datalogging of parameters via PC and Titan’s Interface Software. ASCII flow information can be directly received from the USB connection to ease installation for computer information systems if required. Calibration data can be entered in order to linearise the flowmeter signal for greater accuracy. The Pulsite Link offers NPN, PNP pulses and analog output of 0-5Vdc / 0-10Vdc or 4-20mA and the ability to configure flow alarm outputs.

The Pulsite Link Pulse & Analog Converter Instrument is Ideal for:

  • Integration for PLC
  • Increased accuracy on mechanical devices
  • Data monitoring / Datalogging
  • Test rigs
  • Control systems
  • Flow alarms

Features:

  • Outputs: 4-20mA (active), 0-5Vdc or 0-10Vdc, NPN and PNP logic direct outputs
  • Output test signals via software
  • Inputs: Pulse or Reed switch inputs
  • Inbuilt sensor power supply (+5Vdc)
  • Analog response rate from 100ms
  • Inbuilt Linearisation
  • ASCII data streaming of flow measurement
  • User programmable settings; easy access USB
  • Up to 10 point Calibration point input values
  • Datalogging via PC
  • Software indication for system set up
  • Configurable flow alarm outputs
  • LED indicators with LCD display option
  • Display indicates rate / total / both; local & remote reset
  • 0-65°C
  • IP64 Enclosure
  • Wall or panel mounting brackets

Converter Pulsite Link

Analog and Pulse Converter for Pulse FLowmeters Pulsite Link​

Specifications

  • Pulse input from pulse flowmeters
  • Inputs: PNP, NPN or Reed Switch
  • Outputs: 4 – 20 mA (active), 0 – 5/10 Vdc and NPN
  • +5 Vdc auxilliary supply for flow meter
  • Programmable settings and linearization
  • USB interface and standard software
  • Configurable flow alarm outputs
  • Protection class IP64
  • Power supply 15 – 24 Vdc

 Selecting Liquid Flowmeters Below Half Inch Bore
 Top 10 Tips For Selecting a Flowmeter
 How to Specify Liquid Flowmeters

Other products

©2025. JLC International. All Rights Reserved.

Scroll to Top